云顶娱乐yd12305-云顶4008登录-官网

Chinese   |   English Hotline:86+373-3553177
  • TF sound insulation plate cold bending production line
TF sound insulation plate cold bending production line
Category:Others
The hotline:86+373-3553177
Instructions

A, equipment composition and the brief introduction: 

TF006 sound insulation board production line is mainly composed of decoiler, servo feeding, punching machine, forming machine, end cutting & folding machine, turnover, conveyor, protective system, centralized lubrication system, hydraulic system and electrical control system components, can be set up and in the production of different punch combination plate type, equipment operation is simple, widely used. 

开卷机

TF sound insulation plate cold bending production line open-book section 

隔音板冷弯设备

TF sound insulation plate cold bending forming production line 

Second, the main technical parameters: 

The thickness of 1:0.8 to 1.5 mm 

2 width: 1-2 meters 

3 speed: 8 to 12 m/min 

4 cutter material: Cr12 

5 the roller material: 40 cr, quenching HRC58-62, hard chrome plated surface, high hardness, rust 

 

 

Three, the structure of the machine: 

Description: 1. The structure consists of frame, roll, roll, power transmission system, protective gear, etc. 

2. The frame adopts h-beam base, welding fuselage side panel form, side panel surrounding the machining including pick on h-beam. 

3. The frame to deal with the stress, deformation. The sprocket shaft end installation, the upper and lower axis distance is adjustable. 

4. Gear motor through the chain drive machine under the roller steel strip rolling. A positioning installation, ensure the accuracy of production parts; 

5. Gear motor drive, chain transmission, frequency control of motor speed, roller and the carbon steel. 

6. The host structure consists of two connection parts by the positioning pin nut fastening, each under the fuselage with the horizontal adjustments bolt. 

Roll mould molding process by a professional trained and experienced senior professionals with international advanced German professional cold bending software COPRA design, review, and analyzed by FEA, roll adopts the composite structure, speed difference and forming resistance is small, can guarantee the forming size accurate, stable. 

 

Four, scope of application: 

Widely used in road, elevated, highway, rail transportation, railway, residential area, etc. 

TF隔音板冷弯设备      TF隔音板冷弯设备
 TF隔音板冷弯设备


Phone:86+373-3526651
E-mail:contact@tianfon.com
Address:China, xinxiang, high-tech development
zone is a new street, number 369-1
  • Contact:
  • Phone:
  • Address:
  • E-mail:
  • Note:
  • Captcha:

WeChat scan focus on Tianfon
All rights reserved Henan Tianfon Green Assembling Group   Address:China, xinxiang, high-tech development zone is a new street, number 369-1   Zip:453000

云顶娱乐yd12305|云顶4008登录

XML 地图 | Sitemap 地图